TP-LINK 1910010977 Manuel d'utilisateur télécharger pdf (Page 40)

Easy Smart Configuration Utility

User Guide

Port:

Displays the port number

of the switch.

Ingress Rate (bps):

Configure the bandwidth for receiving packets on the port. You

can select a rate from the dropdown list or select "Manual" to set

Ingress rate, the system will automatically select integral multiple

of 64Kbps that closest to the rate you entered as the real Ingress

rate.

Egress Rate(bps):

Configure the bandwidth for sending packets on the port. You can

select a rate from the dropdown list or select "Manual" to set

Egress rate, the system will automatically select integral multiple

of 64Kbps that closest to the rate you entered as the real Egress

rate.

LAG:

Displays the LAG number which the port belongs to.

Note:

When egress bandwidth control feature is enabled for one or more ports, you are suggested to

disable the flow control on each port to ensure the switch works normally.

7.3 Storm Control

Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network.

If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be

automatically discarded to avoid network broadcast storm.

On this page you can configure and view the storm control function information.

1 2 ... 35 36 37 38 39 40 41 42

Pas de commentaire

TP-LINK 1910010977 Manuel d'utilisateur Page 40