TP-LINK TL-SG2210P Guide de l'utilisateur Page 118

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 188
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 117
Egress Rat
e(bps): Configure the bandwidth for sending packets on the port. You can
select a rate from the dropdown list or select "Manual" to set Egress
rate, the system will automatically select integral multiple of 64Kbps
that closest to the rate you entered as the real Egress rate.
LAG: Displays the LAG number which the port belongs to.
Note:
1. If you enable ingress rate limit feature for the storm control-enabled port, storm control feature
will be disabled for this port.
2. When selecting "Manual" to set Ingress/Egress rate, the system will automatically select
integral multiple of 64Kbps that closest to the rate you entered as the real Ingress/Egress rate.
For example, if you enter 1000Kbps for egress rate, the system will automatically select
1024Kbps as the real Egress rate.
3. When egress rate limit feature is enabled for one or more ports, you are suggested to disable
the flow control on each port to ensure the switch works normally.
9.2.2 Storm Control
Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network.
If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be
automatically discarded to avoid network broadcast storm.
Choose the menu QoSBandwidth ControlStorm Control to load the following page.
For TL-SG2210P/TL-SG2216/TL-SG2424/TL-SG2424P:
Figure 9-13 Storm Control
11
0
Vue de la page 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 187 188

Commentaires sur ces manuels

Pas de commentaire