TP-LINK N600 Guide d'installation télécharger pdf (Page 10)

3. Use a drill with the appropriate size drill bit to drill three 4mm holes for

the pan-head screws, and drill a 10mm hole for the Ethernet cable to feed

through.

10mm hole for Ethernet cable feed

4mm hole for mounting bracket

4. Secure the mounting bracket to the ceiling tile using the pan-head screws,

washers and wing nuts, as shown below.

Hole to feed the Ethernet cable

Hole to feed the screw

Pan-head screw

Wing nut

Washer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

TP-LINK N600 Guide d'installation Page 10