TP-LINK N600 Guide d'installation télécharger pdf (Page 9)

3. Installation

■

Ceiling Mounting

Note:

■

Make sure the thickness of the ceiling is less than 18mm and

the ceiling can bear at least five kilograms.

■

It is NOT recommended to mount the EAP on a low-strength

material, such as gypsum ceiling panel. If no other choice is

available, make sure you add a piece of strong material under

the wing nuts to ensure the EAP is mounted solidly.

1. Remove the ceiling tile.

2. Place the mounting bracket in the center of the ceiling tile. Mark the positions

of the three mounting slots and a hole for the Ethernet cable to feed through.

L≈40mm

Mark of the hole for Ethernet

cable to feed through

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

TP-LINK N600 Guide d'installation Page 9