TP-LINK TL-WR340G Manuel d'utilisateur télécharger pdf (Page 20)

TL-WR340G/TL-WR340GD 54M Wireless Router User Guide

2. If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The

Static IP settings page will appear, shown in

Figure 3-5:

Figure 3-5 WAN - Static IP

You should type the following parameters into the spaces provided:

¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP,

usually is 255.255.255.0.

¾ Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation

provided by your ISP.

¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely

required, and should not be done unless you are sure it is necessary for your ISP

connection.

¾ Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation provided by

your ISP.

¾ Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation provided

by your ISP if provided.

3. If you choose PPPoE, you should enter the following parameters (

Figure 3-6):

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Pas de commentaire

TP-LINK TL-WR340G Manuel d'utilisateur Page 20