TP-LINK TL-WR340G Manuel d'utilisateur télécharger pdf (Page 31)

TL-WR340G/TL-WR340GD 54M Wireless Router User Guide

¾ Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the router can be used. It may be illegal to use the wireless function of

the router in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

The default region is United States. When you select your local region from the pull-down list,

Click the Save button, then the Note Dialog appears. Click OK.

Figure 3-16 Note Dialog

)

Note:

Limited by local law regulations, version for North America does not have region selection option.

¾ Channel - This field determines which operating frequency will be used. It is not necessary

to change the wireless channel unless you notice interference problems with another nearby

access point.

¾ Mode - Select the desired wireless mode. The options are:

• 54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the

router.

• 11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.

)

Note:

The default is "54Mbps (802.11g)", which allows both 802.11g and 802.11b wireless stations to

connect to the router.

¾ Enable Wireless Router Radio - The wireless radio of this Router can be enabled or

disabled to allow wireless stations access. If enabled, wireless stations will be able to

access the router. Otherwise, wireless stations will not be able to access.

¾ Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the Wireless

Router SSID will broadcast its name (SSID) on the air.

¾ Enable Wireless Security – The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption. It is

recommended strongly that you choose this option to encrypt your wireless network. The

encryption settings are described below.

¾ Security Type - You can select one of the following authentication types:

• WEP - Select WEP authentication type based on 802.11 authentications.

• WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared

passphrase.

• WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

Pas de commentaire

TP-LINK TL-WR340G Manuel d'utilisateur Page 31