TP-LINK TL-WR340G Manuel d'utilisateur télécharger pdf (Page 45)

TL-WR340G/TL-WR340GD 54M Wireless Router User Guide

Figure 3-35 Firewall Settings

¾ Enable Firewall - the general firewall switch is on or off.

¾ Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two

default filtering rules of IP Address Filtering, either Allow or Deny passing through the router.

¾ Enable Domain Filtering - set Domain Filtering is enabled or disabled.

¾ Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the

default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router.

3.8.2 IP Address Filtering

The IP address Filtering feature allows you to control Internet Access by specific users on your

LAN based on their IP addresses. The IP address filtering is set on this page,

Figure 3-36:

Figure 3-36 IP address Filtering

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

Pas de commentaire

TP-LINK TL-WR340G Manuel d'utilisateur Page 45