TP-LINK TL-SG5428 Guide de l'utilisateur télécharger pdf (Page 191)

178

removing MAC address entries, which may decrease the performance and

stability of the network. With the Protect of Spanning Tree function enabled, you

can configure the number of TC-BPDUs in a required time, so as to avoid the

process of removing MAC addresses frequently.

Syntax

spanning-tree guard tc

no spanning-tree guard tc

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the TC Protect of Spanning Tree for port 2:

TL-SG5428(config)# interface gigabitEthernet 1/0/2

TL-SG5428(config-if)# spanning-tree guard tc

spanning-tree mcheck

Description

The spanning-tree mcheck command is used to enable mcheck.

Syntax

spanning-tree mcheck

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable mcheck for port 2:

TL-SG5428(config)# interface gigabitEthernet 1/0/2

TL-SG5428(config-if)# spanning-tree mcheck

show spanning-tree active

Description

The show spanning-tree active command is used to display the active

information of spanning-tree.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 238 239

Pas de commentaire

TP-LINK TL-SG5428 Guide de l'utilisateur Page 191