TP-LINK TL-SG5428 Guide de l'utilisateur télécharger pdf (Page 210)

197

snmp-server community

Description

The snmp-server community command is used to add Community. To delete

the corresponding Community, please use no snmp-server community

command. SNMP v1 and SNMP v2c adopt community name authentication.

The community name can limit access to the SNMP agent from SNMP network

management station, functioning as a password.

Syntax

snmp-server community name { read-only | read-write } mib-view

no snmp-server community name

Parameter

name —— Community Name, ranging from 1 to 16 characters.

read-only | read-write —— The access rights of the community, with read-only

and read-write options.

mib-view —— The MIB View for the community to access.

Command Mode

Global Configuration Mode

Example

Add community public, and the community has read-write management right to

View viewDefault:

TL-SG5428(config)# snmp-server community public read-write viewDefault

snmp-server host

Description

The snmp-server host command is used to add Notification. To delete the

corresponding Notification, please use no snmp-server host command.

Syntax

snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 }] [ slev

{ noAuthNoPriv | authNoPriv | authPriv }] [ type { trap | inform }] [ retries retries ]

[ timeout timeout ]

no snmp-server host ip user-name

Parameter

ip —— The IP Address of the management Host.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 238 239

Pas de commentaire

TP-LINK TL-SG5428 Guide de l'utilisateur Page 210