TP-LINK TL-SG5428 Guide de l'utilisateur télécharger pdf (Page 25)

Mode Accessing Path Prompt Logout or Access the next mode

Interface

Configuration

Mode

Use the interface

gigabitEthernet port

or interface range

gigabitEthernet

port-list command to

enter this mode from

Global Configuration

mode.

TL-SG5428(config-if)

# or

TL-SG5428(config-if-

range)#

Use the end command or press Ctrl+Z

to return to Privileged EXEC mode.

Enter the exit or the # command to

return to Global Configuration mode.

A port number must be specified in the

interface command.

VLAN

Configuration

Mode

Use the vlan vlan-list

command to enter this

mode from Global

Configuration mode.

TL-SG5428(config-

vlan)#

Use the end command or press Ctrl+Z

to return to Privileged EXEC mode.

Enter the exit or the # command to

return to Global configuration mode.

Note:

1. The user is automatically in User EXEC Mode after the connection between the PC and

the switch is established by a console port or by a telnet connection.

2. Each command mode has its own set of specific commands. To configure some

commands, you should access the corresponding command mode firstly.

 Global Configuration Mode: In this mode, global commands are provided, such as

the Spanning Tree, Schedule Mode and so on.

 Interface Configuration Mode: In this mode, users can configure one or several

ports, different ports corresponds to different commands

a). Interface gigabitEthernet: Configure parameters for an Ethernet port, such as

Duplex-mode, flow control status.

b). Interface range gigabitEthernet: The commands contained are the same as that

of the Interface Ethernet. Configure parameters for several Ethernet ports.

c). Interface link-aggregation: Configure parameters for a link-aggregation, such as

broadcast storm.

d). Interface range link-aggregation: Configure parameters for multi-trunks.

e). Interface vlan: Configure parameters for the vlan-port.

 Vlan Configuration Mode: In this mode, users can create a VLAN and add a

specified port to the VLAN.

3. Some commands are global, that means they can be performed in all modes:

 show: Displays all information of switch, for example: statistic information, port

information, VLAN information.

 history: Displays the commands history.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 238 239

Commentaires sur ces manuels

Pas de commentaire

TP-LINK TL-SG5428 Guide de l'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel TP-LINK TL-SG5428