TP-LINK TL-SG5428 Guide de l'utilisateur télécharger pdf (Page 215)

202

snmp-server traps mac

Description

The snmp-server traps mac command is used to enable SNMP extended

MAC address-related traps which include four types: new, full,

learn-mode-change and max-learned. To disable the sending of SNMP

extended MAC address related traps, please use no snmp-server traps mac

command.

Syntax

snmp-server traps mac [ new | full | learn-mode-change | max-learned ]

no snmp-server traps mac [ new | full | learn-mode-change | max-learned ]

Parameter

new —— Enable new MAC address trap. It is sent when the switch learns new

MAC address including dynamic address, static address and filter address.

full —— Enable MAC address table trap. It is sent when the MAC address table

is full.

learn-mode-change —— Enable MAC address learn-mode-change trap. It is

sent when MAC address learning mode of the switch changes.

max-learned —— Enable MAC address max-learned trap. It is sent when the

amount of learned MAC address reaches the limit which is configured in port

security module.

Command Mode

Global Configuration Mode

Example

Enable all SNMP extended MAC address-related traps for the switch:

TL-SG5428(config)# snmp-server traps mac

Enable new MAC address trap only for the switch:

TL-SG5428(config)# snmp-server traps mac new

snmp-server traps vlan

Description

The snmp-server traps vlan command is used to enable SNMP extended

VLAN-related traps which include two types: create and delete. To disable this

function, please use no snmp-server traps vlan command.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 238 239

Pas de commentaire

TP-LINK TL-SG5428 Guide de l'utilisateur Page 215